MOXA CB-602I
2-port CAN interface PC/104-Plus module with 2 KV isolation
- CAN 2 .0A and CAN 2.0B supported
- Two independent CAN communication ports
- CAN transfer rate up to 1 Mbps
- 2 KV optical isolation protection
- LED for transmit/receive status on each port
- Optional 120 ohm terminal resistor for CAN bus network
- DLL library and examples included
- Windows driver provided
Moxa’s new CB-602I CAN (Controller Area Network) interface board supports the PC/104-Plus interface. Optional DB9 and DB25 connection cables are available for connecting to CAN interface device. The CB-602I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CB-602I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.
Hardware
Connector
20-pin box header
CAN Controller
NXP SJA1000
CAN Transceiver
PCA82C251
CAN Specification
CAN 2.0 A/B
Signal Support
CAN_H, CAN_L, GND
Transfer Rate
1 Mbps
Max. Number of Boards per PC
4
Electrical Isolation
2 kV
Termination Resistor
120 ohms (selected by jumper)
Driver Support
Operating Systems
Windows 2000, Windows XP/2003/Vista/2008 (x86/x64)
Linux Real TTY Drivers
Linux 2.6.x, 3.x
Software
Libraries
Visual C/C++, Borland C/C++
Environmental Limits
Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models:
-40 to 85°C (-40 to 185°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
EMC
CE, FCC
EMI
EN 61000-3-3, FCC Part 15 Subpart B Class B
EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)
Green Product
RoHS, CRoHS, WEEE
MTBF (mean time between failures)
Time
248,563 hrs
Database
Telcordia (Bellcore), GB
Power Requirements
Power Consumption 380 mA @ 5 VDC
Ordering Information | CB-602I: | 2-port CAN interface PC/104-Plus module with 2 KV optical isolation protection, 0 to 55°C operating temperature |
CB-602I-T: | 2-port CAN interface PC/104-Plus module with 2 KV optical isolation protection, -40 to 85°C operating temperature |
I clienti che hanno visto questo prodotto hanno anche consultato