Milesight UC100
IoT Controller
- Support reading 16 Modbus registers, can connect up to 16 Modbus devices
- Ultra-wide-distance transmission up to line of sight of 15 km
- Multiple triggering conditions and actions
- Embedded watchdog for device working stability
- Support Milesight LoRa D2D protocol to enable ultra-low latency and directly control without LoRaWAN® gateway
- Compliant with standard LoRaWAN® gateways and network servers
- Quick and easy management with Milesight IoT Cloud solution
UC100 is an IoT controller used for remote control and data acquisition from Modbus RS485 devices via LoRaWAN®
networks. It can read up to 16 Modbus RTU devices and support Modbus transparent transmission between server and RS485
devices as a Modbus to LoRaWAN® converter. Besides, UC100 supports multiple trigger conditions and actions which can work
autonomously even when the network dropped. Combining with Milesight IoT Cloud solution, it can monitor and control remote
assets via web server or mobile App easily.
UC100 is widely used in indoor applications like smart metering, smart cities, building automation, etc.
Bridge across the Internet and Modbus Devices
RS485 Interface
LoRaWAN® Based
LoRa D2D
Easy Local & Remote Configuration
Intelligent Trigger System
Autonomous Operation
UC100 is widely used in indoor applications like smart metering, smart cities, building automation, etc.
Bridge across the Internet and Modbus Devices
- Milesight IoT/LoRaWAN Controller UC100 is an easy and intelligent device dedicated to collecting data from on-site Modbus RTU devices, and transmitting them to the Internet via LoRaWAN®.
RS485 Interface
- Offering a RS485 interface for connecting a range of field sensors or devices.
- 3.5 mm Terminal Block
- Reading Up to 16 Registers
LoRaWAN® Based
- RS485 to LoRaWAN Controller UC100 is compatible with LoRaWAN® gateways
- With a range of up to 15 km in rural areas and 2 km in urban areas
- CN470/RU864/IN865/EU868/US915/AU915 /KR920/AS923
LoRa D2D
- Milesight LoRa D2D protocol enables the UC100 to communicate with other Milesight LoRaWAN® node devices within 1 second without a LoRaWAN® gateway.
- When Working as a LoRa D2D Controller Device Triggered by RS485 device to send command to control other LoRa D2D agents
- When Working as a LoRa D2D Agent Device Receiving command from other LoRa D2D controllers to control local RS485 device
Easy Local & Remote Configuration
- USB Type-C Port – Local Configuring
- LoRa Downlink – Remote Configuring
Intelligent Trigger System
- Users are able to set up 16 commands based on custom trigger conditions (If-Then Statements) & actions to realize intelligent task.
Autonomous Operation
- Milesight RS485 to LoRaWAN Controller UC100 can execute the commands autonomously even when the network is unavailable.
Specifications
- Wireless Transmission
- Technology
LoRaWAN®, LoRa D2D
Antenna
Internal Antenna
Frequency
CN470/IN865/EU868/RU864/US915/AU915/KR920/AS923-1&2&3&4
Tx Power
16dBm (868 MHz)/22dBm (915 MHz)/19dBm (470 MHz)
Sensitivity
-137dBm @300bps
Mode
OTAA/ABP Class C
Advanced Feature
LoRa D2D Controller, LoRa D2D Agent
Data Interface
- Port
1 × RS485
Connector
3.5 mm Terminal Block
Terminal Resistor
1 × 120 Ω Resister Switch
Baud Rate
1200~115200 bps
Protocol
Modbus RTU, support reading 16 register values
Others
- Configuration Port
1 × Type-C
Reset Button
1 × Reset Button (Internal)
LED Indicator
1 × System
Physical Characteristics
- Power Connector
3.5 mm Terminal Block
Power Supply
1. 5-24 VDC by Terminal Block
2. 5 VDC by Type-C Port
Power Consumption
< 0.5 W
Material & Color
PC+ABS, White
Ingress Protection
IP30
Operating Temperature
-20°C ~ 60°C (-4℉ to +140℉)
Relative Humidity
0% ~ 95% (non-condensing)
Dimensions
70 × 45 × 13 mm (2.75 × 1.77 × 0.51 in)
Installation
Desktop, Wall
I clienti che hanno visto questo prodotto hanno anche consultato